Products

Milk Bar™ Connect 16

Codice prodotto:910753

Choose the size you need and connect the sections together. The Milk Bar™ Connect hangs off it's own frame which is bolted to your farm rails. The frame hangs the feeder at the perfect height for the calves. The winch hangs off the frame and the feeder winch's up and away from the calves so they can access forage on the outside. The milk quickly flows between the sections, so calves easily find a teat. The Milk Bar™ Connect is super easy to clean with each section fully draining out. For farms on slats, this water can just drain away. For farms with straw, attached the optional drainage system for water to be taken out from the bedding.

The Milk Bar Connect comes in sections of four teats.

Each feeder comes with two ends and the required amount of middle sections to make the desired feeder size.

Each section bolts to a stainless steel plate which hangs of the Connect frame. 

The Connect frame bolts to your exsisting rails and the feeder swings up between feeds giving calves free access to forage.

The feeder is fitted with a heavy duty, braked winch so quickly lower and raise the feeder.

When filling, it takes 4 seconds for milk to find every teat so calves can quickly find a teat and settle down to feed.

When the calves are done, winch the feeder up and rinse it out. Super easy! 

Each Connect section totally drains through a central point. For farms on slats, you can let the water drain through the slats. For farms on bedding, you can attach the optional Connect Clean which removes the water to out side the pen.

It takes 2 minutes to:

  • Winch the feeder up
  • Rinse the milk out
  • Add detergent and scrub and walls and teats
  • Rinse clean

When installing a Connect System into your farm, we recommend that you install a hose to reach all feeders and keep your detergent and brushes in the barn for easy access. If you don't have hot water to the calf barn, you could consider adding a small water heater or califont for a hot wash.

Milk Bar™ Connect 8

Code 910751

Comprises of two ends.        

  • Volume 80 L        
  • Weight 36 kg        
  • Length 1.66 m        
  • Width 34 cm

Milk Bar™ Connect 12

Code 910752

Comprises of two ends and one middle section.        

  • Volume 120 L        
  • Weight 46 kg        
  • Length 2.5 m        
  • Width 34 cm

Milk Bar™ Connect 16

Code 910753

Comprises of two ends and two middle sections.        

  • Volume 160 L        
  • Weight 59 kg        
  • Length 3.32 m        
  • Width 34 cm

Milk Bar™ Connect 20

Code 910754

Comprises of two ends and three middle sections.        

  • Volume 200 L        
  • Weight 67 kg        
  • Length 4.15 m        
  • Width 34 cm

Every Milk Bar Connect comes with a winch, pipe cleaner, the hanging frame and fitted with Milk Bar Teats.

See the Milk Bar Connect in action!

For more information, email us at hello@milkbar.co.nz

 

0:00 / 0:00